Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 6 L4-2.5L >> Repair and Diagnosis >> Body and Frame >> Doors, Hood and Trunk >> Trunk / Liftgate >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Trunk / Liftgate: Service and Repair




TRUNK LID REMOVAL/INSTALLATION

WARNING:
- Removing the stay damper without supporting the trunk lid can be dangerous. The trunk lid may fall and injure you. Open the trunk lid fully and support it before removing the stay damper.

1. Disconnect the negative battery cable.

2. Disconnect the trunk lid wiring harness connector, then take the trunk lid harness out from the vehicle.






3. Remove the trunk grommet in the direction of arrow shown in the figure.






4. Pry off the stay damper band using a flathead screwdriver.






5. Pry out the connecting part of the stay damper and hinge with a flathead screwdriver to disconnect them, then remove the stay damper.

6. Remove nuts, then remove the trunk lid.






7. Remove the bolt, then remove the trunk lid hinge.

8. Install in the reverse order of removal.

9. Adjust the trunk lid. Adjustments

pro multis · About Operation CHARM