Auto-Dimming Mirror Removal

AUTO-DIMMING MIRROR REMOVAL

1. Remove the rain sensor cover. Service and Repair

2. Remove the rain sensor. Service and Repair

3. Disconnect the auto-dimming mirror connector.






4. Make a tool as shown in the figure using wire.






CAUTION:
- Using the tool with bare hands can cause injury. Always wear gloves when using the tool.

- To prevent damage to the lens, do not use a flathead screwdriver.

5. Insert the tool to the position shown in the figure and press the center part of the spring.






CAUTION:
- Perform the procedure while being careful not to damage the lens.

6. Pull out the rearview mirror toward the vehicle rear.






CAUTION:
- When removing the rearview mirror, it may hit the headliner and cause a damage. Hold the rearview mirror with hands and be careful not to contact it with the headliner.