Headliner Removal/Installation

HEADLINER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Partially peel back the seaming welt.

3. Remove the following parts:
a. A-pillar trim A-Pillar Trim Removal/Installation

b. Front scuff plate Front Scuff Plate Removal/Installation

c. Rear scuff plate Rear Scuff Plate Removal/Installation

d. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

e. Front seat belt upper anchor installation bolt Front Seat Belt Removal/Installation

f. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

g. Rear seat cushion Rear Seat Cushion Removal/Installation

h. Rear seat back Rear Seat Back Removal/Installation

i. Rear seat belt lower anchor installation bolt Rear Seat Belt Removal/Installation

j. Trunk end trim Service and Repair

k. Trunk side trim

l. C-pillar trim C-Pillar Trim Removal/Installation

m. Sunvisor Service and Repair

n. Rain sensor cover (Vehicles with auto light / wiper system) Service and Repair

o. Assist handle Service and Repair

4. Disconnect the rain sensor connector (vehicles with auto light / wiper system).

5. Disconnect the rear window washer hose.






6. Disconnect the roof wiring harness connector.

7. Remove the fasteners.

8. Take the headliner out from the opened liftgate.






9. Install in the reverse order of removal.