Sunroof / Moonroof: Adjustments

ROOF OPENING PANEL ALIGNMENT

1. Open the roof opening panel to the VENT position.







2. Loosen the 4 roof opening panel glass screws.
3. Close the roof opening panel glass.







4. NOTE: The correct position of the roof opening panel glass to the roof panel should be -1.5 mm to 0 mm (-0.059 to 0 inch) at the front edge and 0 mm to 1.5 mm (0 to 0.059 inch) at the rear edge of the roof panel.

Make sure the roof opening panel is centered in the roof opening.

Adjust the roof opening panel glass.







5. Open the roof opening panel to the VENT position and tighten the 4 roof opening panel glass screws.