Cruise Test - Part 2
Cruise Test - Part 21. CHECK STARTING FROM D1
1. Move selector lever into "D" position.
2. Accelerate at half throttle.
WITH CONSULT-II
Read the gear position.
Does it start from D1?
YES >> GO TO 2.
NO >> Enter a check mark at "Vehicle Cannot Be Started from D1" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test.
2. CHECK SHIFT-UP D1 -> D2
Press the accelerator pedal down all the way and inspect whether or not the A/T shifts up (D1 -> D2) at the correct speed.
WITH CONSULT-II
Read the gear position, throttle position and vehicle speed.
Does the A/T shift-up D1 -> D2 at the correct speed?
YES >> GO TO 3.
NO >> Enter a check mark at "A/T Does Not Shift D1 -> D2" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test.
3. CHECK SHIFT UP D2 -> D3
Press the accelerator pedal down all the way and inspect whether or not the A/T shifts up (D2 -> D3) at the correct speed.
WITH CONSULT-II
Read the gear position, throttle position and vehicle speed.
Does the A/T shift-up D2 -> D3 at the correct speed?
YES >> GO TO 4.
NO >> Enter a check mark at "A/T Does Not Shift D2 -> D3" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test.
4. CHECK SHIFT-UP D3 -> D4 AND ENGINE BRAKE
When the A/T changes speed D3 -> D4, return the accelerator pedal.
WITH CONSULT-II
Read the gear position.
Does the A/T shift-up D3 -> D4 and apply the engine brake?
YES >>
1. Stop the vehicle.
2. Go to AT-62, "Cruise Test - Part 3". Cruise Test - Part 3
NO >> Enter a check mark at "A/T Does Not Shift D3 -> D4" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test. Go to AT-62, "Cruise Test - Part 3". Cruise Test - Part 3