Hinge Replacement - Floor Console Arm Rest

Hinge Replacement - Floor Console Arm Rest

Removal Procedure





1. Lift up the floor console armrest (1).
2. Remove the 2 screws (6) attaching the armrest hinge (8) to the floor console.
3. Slide the armrest (1) rearward to remove the hinge (8) from the floor console.
4. Remove the 2 screws (7) attaching the hinge (8) to the armrest (1).
5. Remove the hinge (8) from the armrest (1).



Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the hinge (8) to the armrest (1) and secure with the 2 screws (7).

Tighten the2 screws (7) to 2 N.m (18 lb in).

2. Install the armrest (1) with hinge (8) to the floor console and secure with the 2 screws (6).

Tighten the 2 screws (6) to 2 N.m (18 lb in).

3. Close the console armrest (1).