Stabilizer Link: Service and Repair

Stabilizer Shaft Link Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair) .
3. Disconnect the stabilizer link from the stabilizer shaft.




4. Disconnect the stabilizer link from the strut assembly and remove from the vehicle.



Installation Procedure






Notice: Refer to Fastener Notice .

1. Connect the stabilizer link to the strut assembly.

Tighten the stabilizer link nut to 65 N.m (48 lb ft).

2. Connect the stabilizer link to the stabilizer shaft.

Tighten the stabilizer link nut to 65 N.m (48 lb ft).

3. Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair) .
4. Lower the vehicle.