Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Cylinder Head Assembly: Specifications
Cylinder Head Surface VariationSurface Finish - Maximum 2.8 RA
Surface Flatness - Block Deck 0.08 mm Per 152 mm (0.003 in Per 6 in)
Cylinder Head Bolt Re-usability
Install the NEW small hex cylinder head bolts (5 and 8).
Install the NEW large hex cylinder head bolts (1, 2, 3, 4, 6 and 7).
Cylinder Head Bolt
First Pass 60 N.m (44 lb ft)
Final Pass 140 degrees
Exhaust Manifold Bolt 20 N.m (15 lb ft)
Lower Intake Manifold Bolt - Center
First Pass 7 N.m (62 lb in)
Final Pass 13 N.m (115 lb in)
Lower Intake Manifold Bolt - Corner
First Pass 7 N.m (62 lb in)
Final Pass 25 N.m (18 lb ft)
Upper Intake Manifold Bolt/Stud 25 N.m (18 lb ft)