Power Seat Motor: Adjustments

Seat Adjuster Phase Adjustment

Adjustment Procedure

1. Disable the SIR. Refer to SIR Disabling and Enabling (Service and Repair) .




2. Using the power seat switch, run the seat adjuster rearward until the drive bracket (3) and the anchor bracket (2) are together on either side of the adjuster.
3. Remove the drive cable (4) from the side of the adjuster which contains the brackets that touch.
4. Use the power seat switch to run the adjuster rearward until the other pair of brackets are together.
5. Install the removed drive cable.

Important: Inspect all 4 cables to verify that the cables are straight.


6. Test the adjuster for proper operation.
7. Enable the SIR. Refer to SIR Disabling and Enabling (Service and Repair) .