Stabilizer Link: Service and Repair

Stabilizer Shaft Link Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Disconnect the stabilizer link from the stabilizer shaft.




4. Disconnect the stabilizer link from the strut assembly and remove from the vehicle.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Connect the stabilizer link to the strut assembly and tighten to 65 Nm (48 lb ft).
2. Connect the stabilizer link to the stabilizer shaft and tighten to 65 Nm (48 lb ft).
3. Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).
4. Lower the vehicle.