Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rocker Arm Assembly: Service and Repair




Valve Rocker Arm and Push Rod Replacement

Removal Procedure

1. Remove the valve rocker arm covers. Refer to Valve Rocker Arm Cover Replacement - Left Side (Valve Rocker Arm Cover Replacement - Left Side) or Valve Rocker Arm Cover Replacement - Right Side (Valve Rocker Arm Cover Replacement - Right Side).





Note: Keep the components separated in order to install the components in the same location.

2. Remove the rocker arm bolts.
3. Remove the rocker arms.
4. Remove the pushrods.

Installation Procedure




1. Install the pushrods in the original location.

* Coat the ends of the pushrods with lubricant. Refer to Adhesives, Fluids, Lubricants, and Sealers (Specifications) for the 3.5L engine.
* The intake pushrods are identified with yellow stripes and are 5 3/4 inches long.
* Exhaust pushrods are identified with green stripes and are 6 inches long.
* Ensure that the pushrods seat in the lifter.

2. Install the rocker arms.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the rocker arm bolts.

Tighten the rocker arm bolts to 32 Nm (24 lb ft).

4. Install the valve rocker covers. Refer to Valve Rocker Arm Cover Replacement - Left Side (Valve Rocker Arm Cover Replacement - Left Side) or Valve Rocker Arm Cover Replacement - Right Side (Valve Rocker Arm Cover Replacement - Right Side).