Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Equator 4WD V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Component Tests and General Diagnostics >> 4WD Branch Line Circuit Check
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

4WD Branch Line Circuit Check




4WD Branch Line Circuit Check

1. CHECK CONNECTOR

1 Turn the ignition switch OFF.
2 Disconnect the battery cable from the negative terminal.
3 Check the terminals and connectors of the transfer control unit for damage, bend and loose connection (unit side and connector side).

Is the inspection result normal?
YES
GO TO 2.
NO
Repair the terminal and connector.

2. CHECK HARNESS FOR OPEN CIRCUIT

1 Disconnect the connector of transfer control unit.
2 Check the resistance between the transfer control unit harness connector terminals.






Is the measurement value within the specification?
YES
GO TO 3.
NO
Repair the transfer control unit branch line.

3. CHECK POWER SUPPLY AND GROUND CIRCUIT

Check the power supply and the ground circuit of the transfer control unit. Refer to [P1801, P1811 Power Supply Circuit for Transfer Control Unit] P1801.

Is the inspection result normal?
YES (Present error)
Replace the transfer control unit. Refer to [Transfer Control Unit: Removal and Installation] Service and Repair.
YES (Past error)
Error was detected in the transfer control unit branch line.
NO
ERROR! Unknown action!Repair the power supply and the ground circuit.

pro multis · About Operation CHARM