Removal

2TR-FE EXHAUST: EXHAUST PIPE: REMOVAL

REMOVAL

1. CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE AIR FUEL RATIO SENSOR Removal
3. REMOVE OXYGEN SENSOR Removal
4. REMOVE EXHAUST PIPE ASSEMBLY TAIL
(a) Remove the 2 bolts and 2 nuts.
(b) Remove the exhaust pipe tail from the 4 exhaust pipe supports.
(c) Remove the gasket from the exhaust pipe front.
5. REMOVE EXHAUST PIPE ASSEMBLY FRONT
(a) Remove the 2 bolts and 2 compression springs.
(b) Remove the exhaust pipe front from the exhaust pipe support.
(c) Remove the gasket from the exhaust manifold.