Installation

2TR-FE STARTING: STARTER: INSTALLATION

INSTALLATION

1. INSTALL STARTER ASSEMBLY





(a) Install the starter with the 2 bolts.
Torque: 37 Nm (377 kgf-cm, 27 ft-lbf)





(b) Connect the starter connector.
(c) Install the starter wire harness with the nut.
Torque: 9.8 Nm (100 kgf-cm, 7 ft-lbf)
(d) Install the terminal cap.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)