Removal

LIGHTING: IGNITION KEY CYLINDER LIGHT: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LOWER STEERING COLUMN COVER Removal
3. REMOVE UPPER STEERING COLUMN COVER Removal
4. REMOVE IGNITION KEY CYLINDER LIGHT





(a) Disconnect the unlock warning switch connector.
(b) Detach the 2 claws.
(c) Disconnect the connector and remove the key cylinder light.