Installation

DRIVE SHAFT / PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: INSTALLATION

1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

(a) Align the matchmarks on the yoke and differential flange.

(b) Install the propeller shaft assembly with the 4 washers, 4 bolts and 4 nuts.

Torque : 88 Nm (899 kgf-cm, 65 ft-lbf)

(c) Align the matchmarks on the yoke and transfer flange.

(d) Install the propeller shaft assembly with the 4 washers and 4 nuts.

Torque : 88 Nm (899 kgf-cm, 65 ft-lbf)

2. INSTALL FRONT EXHAUST PIPE

(a) Install the front exhaust pipe Installation.