Removal

EXTERIOR: FENDER LINER (for Front Side): REMOVAL

1. REMOVE ENGINE UNDER COVER ASSEMBLY (for 2GR-FE) Removal

2. REMOVE NO. 1 ENGINE UNDER COVER

3. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH Removal

4. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH

HINT
Use the same procedures for the RH side and LH side.

5. REMOVE FRONT WHEEL OPENING EXTENSION PAD (for LH Side)

(a) Remove the 2 screws and front wheel opening extension pad.





6. REMOVE FRONT WHEEL OPENING EXTENSION PAD (for RH Side)

HINT
Use the same procedure for the RH side and LH side.

7. REMOVE FRONT FENDER LINER LH

(a) Remove the screw.





(b) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

(c) Using a 4 mm hexagon wrench, remove the 2 screws.





(d) Remove the 2 grommets.

HINT
The grommets need to be replaced with new ones because they will break when they are removed.

(e) Remove the 5 clips, 8 screws and front fender liner LH.





8. REMOVE FRONT FENDER LINER RH

(a) Remove the screw.





(b) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

(c) Using a 4 mm hexagon wrench, remove the 2 screws.





(d) Remove the 2 grommets.

HINT
The grommets need to be replaced with new ones because they will break when they are removed.

(e) Remove the 5 clips, 7 screws and front fender liner RH.