Removal

3UR-FE FUEL: FUEL INJECTOR: REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE

(a) Discharge the fuel system pressure Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE AIR CLEANER HOSE ASSEMBLY Removal

5. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

(a) Remove the No. 1 engine cover sub-assembly.

6. REMOVE NO. 3 ENGINE COVER

(a) Remove the No. 3 engine cover.

7. DISCONNECT NO. 2 FUEL TUBE

(a) Disconnect the No. 2 fuel tube from the fuel pressure regulator Service Precautions.

8. DISCONNECT NO. 1 FUEL TUBE

(a) RH Side:

Disconnect the No. 1 fuel tube from the fuel delivery pipe RH Service Precautions.

(b) LH Side:

Disconnect the No. 1 fuel tube from the fuel delivery pipe LH Service Precautions.

9. DISCONNECT NO. 1 FUEL HOSE

(a) Disconnect the fuel hose from the fuel delivery pipe LH Service Precautions.

10. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY RH

(a) Disconnect the ventilation hose and No. 6 wire harness connector.

(b) Remove the 2 bolts and fuel delivery pipe RH.

NOTICE:
When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

(c) Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head RH.

11. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY LH

(a) Disconnect the No. 7 wire harness connector.

(b) Remove the 2 bolts and fuel delivery pipe LH.

NOTICE:
When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

(c) Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head LH.

12. REMOVE FUEL INJECTOR ASSEMBLY

(a) Remove the fuel injector from the fuel delivery pipe, and then disconnect the injector connector.

NOTICE:

For reinstallation, attach a tag or label to the injector shaft.

(b) Remove the O-ring from the fuel injector.

(d) Detach the 3 clamps and then remove the No. 7 wire harness from the delivery pipe LH.