Removal

3UR-FE STARTING: STARTER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH Removal

3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH Removal

4. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal

5. REMOVE NO. 2 ENGINE UNDER COVER Removal

6. REMOVE FRONT FENDER APRON SEAL FRONT RH Removal

7. REMOVE FRONT FENDER APRON SEAL REAR RH Removal

8. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE Removal

9. REMOVE TAILPIPE ASSEMBLY Removal

10. REMOVE CENTER EXHAUST PIPE ASSEMBLY Removal

11. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal

12. REMOVE NO. 1 MANIFOLD STAY Removal

13. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR Removal

14. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH Removal

15. REMOVE STARTER COVER

(a) Remove the 3 bolts and starter cover.





16. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.





(b) Remove the nut and disconnect the starter wire.

(c) Remove the 2 bolts and starter.





(d) Remove the flywheel housing side cover.