Installation

EXTERIOR: FRONT BUMPER (w/ Under Guard): INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL FRONT BUMPER SIDE RETAINER LH Installation

2. INSTALL FRONT BUMPER SIDE RETAINER RH Installation

3. INSTALL FRONT BUMPER REINFORCEMENT Installation

4. INSTALL FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY Installation

5. INSTALL LOW PITCHED HORN ASSEMBLY Installation

6. INSTALL HIGH PITCHED HORN ASSEMBLY Installation

7. INSTALL FRONT BUMPER CENTER STAY SUB-ASSEMBLY Installation

8. INSTALL FRONT NO. 2 BUMPER ENERGY ABSORBER Installation

9. INSTALL FRONT BUMPER COVER

(a) Connect the 2 fog light connectors.

(b) Attach the 4 claws to install the bumper cover.

(d) Install the retainer.

HINT
Use the same procedure for RH and LH sides.

(e) Position the groove on the pin hold clip vertically and insert the clip to install it.

NOTICE:
Make sure that the groove on the pin hold clip is positioned vertically.

HINT
Use the same procedure for RH and LH sides.

10. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH Installation

11. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH Installation

12. INSTALL RADIATOR GRILLE PROTECTOR Installation

13. INSTALL CENTER HOOD CUSHION Installation

14. INSTALL RADIATOR SUPPORT OPENING COVER Installation