Installation

2AR-FE COOLING: WATER PUMP: INSTALLATION

1. INSTALL WATER PUMP ASSEMBLY

(a) Install a new gasket and the water pump with the 7 bolts.





Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)

(b) Install the wire harness bracket with the bolt.





(c) Attach the clamp of the wire harness to the wire harness bracket.

2. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

(a) Install the V-ribbed belt tensioner with the bolt.





Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)

3. INSTALL GENERATOR ASSEMBLY

(a) Install the generator assembly Installation.

4. INSTALL FAN & GENERATOR V BELT Installation

5. INSTALL RADIATOR RESERVOIR

(a) Install the radiator reservoir with the 2 bolts.





Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

(b) Connect the No. 1 and No. 2 water by-pass hoses.

6. INSTALL REAR ENGINE UNDER COVER RH Installation

7. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

8. ADD ENGINE COOLANT Service and Repair

9. INSPECT FOR COOLANT LEAK Testing and Inspection

10. INSTALL NO. 1 ENGINE UNDER COVER Installation

11. INSTALL RADIATOR SUPPORT OPENING COVER

(a) Install the support opening cover with the 9 clips.





12. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation