Removal

2AR-FE EXHAUST: EXHAUST PIPE: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) Removal

3. REMOVE TAILPIPE ASSEMBLY

(a) Remove the 2 bolts and 2 compression springs.

(b) Disconnect the 2 exhaust pipe supports and remove the tailpipe.

(c) Remove the gasket from the center exhaust pipe.





4. REMOVE CENTER EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts.

(b) Disconnect the 3 exhaust pipe supports and remove the center exhaust pipe.





(c) Remove the gasket from the front exhaust pipe.





5. REMOVE FRONT EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts, 2 compression springs and front exhaust pipe.

(b) Remove the gasket from the exhaust manifold converter.