Removal

AIR CONDITIONING: AIR CONDITIONING PANEL (for Manual Air Conditioning System): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER Removal

3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER Removal

4. REMOVE RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)

(a) w/o Navigation System:

Remove the radio receiver Removal.

(b) w/ Navigation System:

Remove the radio receiver Removal.

5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

(a) Remove the 2 screws.





(b) Using a screwdriver, detach the 3 clips.

HINT
Tape the screwdriver tip before use.

(c) Disconnect the connectors and remove the air conditioning control.

6. REMOVE AIR MIX CONTROL SWITCH

(a) Detach the 2 claws and remove the air mix control switch.





7. REMOVE BLOWER CONTROL SWITCH

(a) Detach the 2 claws and remove the blower control switch.





8. REMOVE AIR VENT MODE CONTROL SWITCH

(a) Detach the 2 claws and remove the mode control switch.