Removal

2AR-FE STARTING: STARTER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

3. REMOVE RADIATOR SUPPORT OPENING COVER Removal

4. REMOVE BATTERY CLAMP

(a) Remove the bolt and loosen the nut.





(b) Detach the 2 wire harness clamps.

(c) Detach the hook of the battery clamp from the front battery bracket, and then remove the battery clamp.

5. REMOVE BATTERY INSULATOR

6. REMOVE BATTERY

7. REMOVE BATTERY TRAY

8. REMOVE FRONT BATTERY BRACKET

(a) Detach the 2 wire harness clamps.





(b) Remove the 4 bolts and front battery bracket.

9. REMOVE BATTERY BRACKET REINFORCEMENT

(a) Remove the 2 bolts and battery bracket reinforcement.





10. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.





(b) Open the terminal cap, remove the nut and disconnect the starter wire.

(c) Remove the 2 bolts and starter.