Removal

POWER STEERING: VANE PUMP: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL RH
2. DRAIN POWER STEERING FLUID
3. REMOVE ENGINE UNDER COVER RH
4. REMOVE FAN AND GENERATOR V BELT (Removal)

5. DISCONNECT OIL RESERVOIR TO PUMP HOSE NO. 1





(a) Remove the clip and disconnect the oil reservoir to pump hose No. 1.
6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY





(a) Using SST, disconnect the pressure feed tube assembly.
SST: 09023-12901
(b) Remove the bolt and disconnect the pressure feed tube clamp.
7. REMOVE VANE PUMP BRACKET REAR
(a) Remove the bolt and vane pump bracket rear.
8. REMOVE VANE PUMP ASSEMBLY





(a) Disconnect the oil pressure switch connector.
(b) Remove the 2 bolts, 2 nuts and vane pump assembly.