Electronically Controlled Brake System
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: DIAGNOSTIC TROUBLE CODE CHART
NOTICE:
When replacing the brake booster with master cylinder (skid control ECU), sensor, etc., make sure that the power switch is turned off, the stop light switch is off, and 2 minutes have elapsed since the driver's door was closed.
HINT
* If no abnormality is found when inspecting parts, inspect the skid control ECU and ground points for poor connections.
* If a trouble code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, refer to the respective "DTC Code" in the DTC chart.
* When 2 or more DTCs are detected, perform circuit inspections one by one until the problem is identified.
* Inspect the fuses and relays before inspecting the trouble areas as shown in the table below.
42 / C0200/31-C0205/32:
C0210/33-C0215/34:
C1235/35-C2136/36:
C1238/38-C1245/45:
C1336/98-C1442/44 / U0124/95:
43-45 / C1210/36-C1439/66:
C1440/98-C1445/66 / U0123/62-U0126/63:
36 / C1202/68-C1211/25:
C1212/26-C1228/34:
C1242/42-C1247/47:
C1249/49-C1257/57:
C1259/58-C1356/22:
C1357/24-C1392/48:
C1451/72 / U0073/94-U0293/59:
C1241/41:
*1: Electronically Controlled Brake System DTC
*2: ABS DTC
