CD Cannot be Inserted / Played or CD is Ejected Right After Insertion

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: CD cannot be Inserted / Played or CD is Ejected Right After Insertion
- CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF A PROPER CD IS INSERTED

(a) Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

OK:

CD is normal.

HINT
* Translucent or uniquely-shaped CDs cannot be played.
* Commercial audio CDs can be played.
* CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
* MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.
* For details on playable CDs, refer to the Owner's Manual.

NG -- CD IS FAULTY
OK -- Continue to next step.

2. CHECK THAT CD IS INSERTED PROPERLY

(a) Check whether or not the CD is inserted upside down.

OK:

CD is properly inserted.

NG -- SET CD PROPERLY
OK -- Continue to next step.

3. CLEAN CD AND RECHECK

(a) Disc cleaning





(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.

NOTICE:
Do not use a conventional record cleaner or anti-static preservative.

NG -- CHECK OPERATION WITH ANOTHER CD

OK -- END (CD WAS DIRTY)

4. CHECK OPERATION WITH ANOTHER CD

(a) Check using another CD.

(1) Check if the problem recurs using another CD.

OK:

The problem does not occur.

NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal

OK -- CD WAS FAULTY