Installation

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY

(a) Install the front seat inner belt assembly with the nut.









Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

NOTICE:
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

(b) Connect each connector and clamps.

2. INSTALL FRONT SEAT ASSEMBLY Installation

3. INSTALL INNER SEAT TRACK COVER Installation

4. INSTALL OUTER SEAT TRACK COVER Installation

5. INSTALL FRONT SEAT HEADREST ASSEMBLY Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. INSTALL REAR NO. 3 FLOOR BOARD Installation

8. INSTALL REAR DECK FLOOR BOX Installation

9. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Installation

10. INSPECT FRONT SEAT ASSEMBLY Installation

11. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.