Removal

WIPER / WASHER: WASHER MOTOR (for Front Side): REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE FRONT FENDER LINER RH

(a) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.





(b) Remove the 10 clips and 4 screws.





(c) Using a clip remover, remove the grommet and the front fender liner RH.

HINT
The grommet needs to be replaced with new one because it will break when it is removed.

3. DRAIN WASHER FLUID

(a) Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.





HINT
Use a container to collect the washer fluid.

4. REMOVE FRONT WASHER MOTOR AND PUMP ASSEMBLY

(a) Disconnect the connector.





(b) Remove the windshield washer motor and pump assembly.