Removal

2GR-FE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE NO. 1 ENGINE UNDER COVER

3. SEPARATE FRONT FENDER LINER RH

4. REMOVE FRONT FENDER APRON RH

5. REMOVE V-RIBBED BELT Removal

6. REMOVE CRANKSHAFT PULLEY

(a) Using SST, loosen the crankshaft pulley bolt.





SST : 09213-70011

09213-70020

SST : 09330-00021

(b) Using SST, remove the crankshaft pulley bolt and crankshaft pulley.





SST : 09950-50013

09951-05010

09952-05010

09953-05020

09954-05021

(c) Remove the pulley set key from the crankshaft.





7. REMOVE TIMING CHAIN CASE OIL SEAL

(a) Using a knife, cut off the timing chain case oil seal lip.





(b) Using a screwdriver, pry out the timing chain case oil seal.

NOTICE:
After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

HINT
Tape the screwdriver tip before use.