Removal

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL

1. REMOVE REAR DOOR SCUFF PLATE Removal

2. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

(a) Remove the rear part of the rear door opening trim weatherstrip to the extent that allows removal of the deck trim side panel assembly and roof side inner garnish assembly.

3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

4. REMOVE DECK BOARD ASSEMBLY Removal

5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY Removal

6. REMOVE DECK SIDE TRIM BOX LH Removal

7. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal

8. REMOVE DECK SIDE TRIM BOX RH Removal

9. REMOVE NO. 1 DECK BOARD Removal

10. REMOVE REAR SEAT SUB FLOOR PANEL ASSEMBLY Removal

11. REMOVE REAR FLOOR FINISH PLATE Removal

12. REMOVE REAR SEAT HEADREST ASSEMBLY (for LH Side) Removal

13. REMOVE REAR SEAT INNER TRACK BRACKET COVER (for LH Side) Removal

14. REMOVE REAR SEAT OUTER TRACK BRACKET COVER (for LH Side) Removal

15. DISCONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY (for LH Side) Removal

16. REMOVE REAR SEAT ASSEMBLY LH (for LH Side) Removal

17. REMOVE REAR SEAT HEADREST ASSEMBLY (for RH Side) Removal

18. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side) Removal

19. REMOVE REAR SEAT INNER TRACK BRACKET COVER (for RH Side) Removal

20. REMOVE REAR SEAT OUTER TRACK BRACKET COVER (for RH Side) Removal

21. DISCONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (for RH Side) Removal

22. REMOVE REAR SEAT ASSEMBLY RH (for RH Side) Removal

23. REMOVE RECLINING REMOTE CONTROL BEZEL Removal

24. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Removal

25. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY

(a) Remove the bolt and disconnect the floor end of the rear seat outer belt assembly.

26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) Removal

27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) Removal

28. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY Removal

29. REMOVE REAR SEAT OUTER BELT ASSEMBLY

(a) Remove the bolt and disconnect the shoulder anchor of the rear seat outer belt assembly.

(b) Remove the 2 bolts.