Removal

2AR-FE STARTING: STARTER: REMOVAL

1. PRECAUTION

NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

5. REMOVE INLET AIR CLEANER ASSEMBLY Removal

6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

7. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

9. REMOVE BATTERY Removal

10. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.





(b) Open the terminal cap, remove the nut and disconnect the starter wire.

(c) Remove the 2 bolts and starter.