Removal

U760E AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: REMOVAL

1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

Removal

2. REMOVE TORQUE CONVERTER ASSEMBLY Removal

3. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

(a) Remove the 19 bolts and automatic transaxle oil pan sub-assembly from the transaxle case sub-assembly.





NOTICE:
Some fluid will remain in the automatic transaxle oil pan sub-assembly. Remove all the bolts, and carefully remove the automatic transaxle oil pan sub-assembly.

4. REMOVE AUTOMATIC TRANSAXLE OIL PAN GASKET

(a) Remove the automatic transaxle oil pan gasket.

5. REMOVE TRANSMISSION OIL CLEANER MAGNET

(a) Remove the 2 transmission oil cleaner magnets from the automatic transaxle oil pan sub-assembly.





Text in Illustration





(b) Examine particles in the automatic transaxle oil pan sub-assembly.





(1) Collect any steel chips with the removed magnets. Look carefully at the chips and particles in the automatic transaxle oil pan sub-assembly and on the transmission oil cleaner magnets to see the type of wear which might be found in the automatic transaxle assembly.

Result





6. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

(a) Remove the 2 bolts and valve body oil strainer assembly from the transmission valve body assembly.





(b) Remove the O-ring from the valve body oil strainer assembly.





7. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

(a) Remove the 11 bolts and transmission valve body assembly from the transaxle case sub-assembly.





NOTICE:
When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and the transaxle case sub-assembly to interfere with each other.

8. REMOVE NO. 1 GOVERNOR APPLY GASKET

(a) Remove the 2 No. 1 governor apply gaskets from the transaxle case sub-assembly.





9. REMOVE MANUAL VALVE

(a) Remove the manual valve from the transmission valve body assembly.