Installation

AUDIO / VIDEO: RADIO RECEIVER: INSTALLATION

1. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

2. INSTALL EXTENSION MODULE (w/ Navigation System) Installation

3. INSTALL NO. 1 RADIO RECEIVER BRACKET

(a) w/o Navigation System:

(1) Install the No. 1 radio receiver bracket with the 4 screws.

(b) w/ Navigation System:

(1) Install the No. 1 radio receiver bracket with the 6 screws.

4. INSTALL NO. 2 RADIO RECEIVER BRACKET

HINT
Use the same procedure as for the No. 1 radio receiver bracket.

5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

(a) Connect each connector.

(b) Engage the 2 guides and 5 claws.

(c) Install the radio and display receiver assembly with bracket with the 4 bolts.

6. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Installation

7. INSTALL INSTRUMENT PANEL BOX ASSEMBLY Installation

8. INSTALL INTEGRATION CONTROL AND PANEL Installation

9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

10. INSTALL DECK FLOOR BOX RH Installation

11. INSTALL REAR DECK FLOOR BOX Installation

12. INSTALL NO. 1 DECK BOARD Installation

13. INSTALL NO. 2 DECK BOARD Installation

14. INSTALL DECK BOARD ASSEMBLY Installation