Removal

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure described below is for the LH side.

1. REMOVE DECK BOARD ASSEMBLY Removal

2. REMOVE NO. 1 DECK BOARD Removal

3. REMOVE NO. 2 DECK BOARD Removal

4. REMOVE REAR DECK FLOOR BOX Removal

5. REMOVE DECK FLOOR BOX RH (for RH Side) Removal

6. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

7. REMOVE FRONT DECK FLOOR BOX Removal

8. REMOVE REAR NO. 1 FLOOR BOARD Removal

9. REMOVE BACK DOOR SCUFF PLATE Removal

10. REMOVE REAR DOOR SCUFF PLATE Removal

11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP Removal

12. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Removal

13. REMOVE FRONT DECK SIDE TRIM COVER Removal

14. REMOVE REAR DECK TRIM COVER (for RH Side) Removal

15. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (for LH Side) Removal

16. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY Removal

17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY Removal

18. REMOVE REAR COMBINATION LIGHT ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 3 nuts.

(c) Disengage the pin and guide, and remove the rear combination light assembly as shown in the illustration.





Text in Illustration