Removal

POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE DECK BOARD ASSEMBLY Removal

3. REMOVE NO. 1 DECK BOARD Removal

4. REMOVE NO. 2 DECK BOARD Removal

5. REMOVE REAR DECK FLOOR BOX Removal

6. REMOVE DECK FLOOR BOX RH Removal

7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

10. REMOVE ECU INTEGRATION BOX RH

(a) Disconnect each connector.





Text in Illustration





(b) Disengage the 3 clamps.





(c) Remove the bolt and 2 nuts, and ECU integration box RH.

11. REMOVE POWER MANAGEMENT CONTROL ECU

(a) Using a screwdriver, disengage the 2 claws and remove the power management control ECU as shown in the illustration.