Computers and Control Systems: Locations

MULTIPORT FUEL INJECTION SYSTEM COMPONENTS OVERVIEW





1 - Evaporative Emission (EVAP) canister purge regulator valve -N80-
2 - EGR vacuum regulator solenoid valve -N18-.
3 - Mass Air Flow (MAF) sensor -G70-
4 - Throttle Position (TP) sensor -G69-
5 - Motronic Engine Control Module (ECM) -J220-
6 - Harness connector
7 - Intake Air Temperature (IAT) sensor -G72-
8 - Idle Air Control (IAC) valve -N71-
9 - EGR temperature sensor -G98-
10 - EGR valve
11 - Ignition coil -N152-
12 - Vehicle Speed Sensor (VSS) -G22-
13 - Engine Coolant Temperature (ECT) sensor -G62-
14 - Central connector
15 - 3-pin harness connector
16 - 3-pin harness connector
17 - Engine Speed (RPM) sensor -G28-
18 - Secondary Air Injection (AIR) pump motor -V101-
19 - Distributor with Camshaft Position (CMP) sensor -G40-
20 - Fuel injectors -N30-, -N31-, -N32-, -N33-
21 - Knock Sensor (KS) 1 -G61-
22 - Ground (GND) connection
23 - Fuel pressure regulator
24 - Temperature regulator
25 - Evaporative Emissions (EVAP) canister