Washer Fluid Level Switch: Service and Repair

Windshield Washer Fluid Level Sensor (G33)

The Windshield Washer Fluid Level Sensor is installed on windshield washer and headlamp cleaning system tank in front of right front wheel housing.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Remove front bumper cover.

- Disengage and disconnect harness connector - 6 - at Windshield Washer Fluid Level Sensor - 7 -.





- Pull Windshield Washer Fluid Level Sensor - 7 - out of its rubber seal.

Installing:

Install in reverse order of removal, noting the following:

- Bleed headlamp washer system after completing assembly work, refer to => [ Headlamp Washer System, Bleeding ] Headlamp Washer System, Bleeding.