GF. Checking the Throttle Switch

GF. Checking the throttle switch

GF1




Checking the adjustment of the throttle switch
Rotate the throttle control a little and listen for the clicking sound of the idle switch.

If the switch clicks:
^ Connection of measurement box GF2.

If the switch does not click:
^ Adjust the throttle switch according to RC. Adjustment of throttle switch. RC. Adjustment of Throttle Switch

GF2




Connection of measurement box
Connect the measurement box and check the chassis connections according to N1-N2. N. Measurement Box, Signal Description
^ Continue with Checking of idle signal, Regina GF3.

GF3




Checking of idle signal, Regina
- Ignition on.
Connect a voltmeter between #2 and #5.
The voltmeter should show approx. 0 V.
- Rotate the throttle control so that the idle switch opens.
The voltmeter should show approx. 5 V.

If the value differs:
^ Check the wiring between #2 and the throttle switch for breakage according to CD. CD. Checking of Wiring