Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Checking Pressure Switch (Pressostat)




Checking Pressure Switch (Pressostat)







- Filling point low pressure side (blue hose) connected to service valve.
- Engine idling.
- Place blower fan switch to position 0.
- Place Air Conditioning (A/C) switch to off,
- Disconnect the pressure switch (Pressostat) connector,

Start the compressor by connecting the magnetic clutch cable to the battery positive terminal.


WARNING
The compressor may be connected like this for a maximum of 3 minutes.



Connect an ohmmeter over both pressure switch (Pressostat) terminals.


NOTE: If the pressure falls below 140 kPa, but the ohmmeter continues to display 0 [ohm], stop and disconnect the compressor.


The ohmmeter should read infinite resistance at a compressor pressure of 150 - 170 kPa.

OK - Test Complete

Not OK - Refer to Replacing the Component.