Compressor HVAC: Adjustments
A/C Compressor BeltDeflection Method
1. Apply a force of 98 N (10 kgf, 22 lbf), and measure the deflection between the A/C compressor and the alternator.
A/C Compressor Belt
Used Belt: 7.0 - 9.0 mm (0.28 - 0.35 in)
New Belt: 4.0 - 6.0 mm (0.16 - 0.24 in)
NOTE:
- If there are cracks or any damage evident on the belt, replace it with a new one.
- "Used belt" means a belt which has been used for five minutes or more.
- "New belt" means a belt which has been used for less than five minutes.
2. Loosen the upper mounting bolt and the lower mounting nut of the alternator.
3. Turn the adjusting bolt to get proper belt tension, then retighten the lower mounting nut and the upper mounting bolt.
4. Recheck the deflection of the A/C compressor belt.
Tension Gauge Method
NOTE:
- If there are cracks or any damage evident on the belt, replace it with a new one.
- Follow the manufacturer's instructions for the belt tension gauge.
- "Used belt" means a belt which has been used for five minutes or more.
- "New belt" means a belt which has been used for less than five minutes.
1. Attach the special tool to the A/C compressor belt as shown, and measure the tension of the belt.
A/C Compressor Belt
Used Belt: 490 - 590 N (50 - 60 kgf, 110 - 130 lbf)
New Belt: 1.030 - 1.125 N (105 - 115 kgf, 231 - 254 lbf)
2. Loosen the upper mounting bolt and the lower mounting nut of the alternator.
3. Turn the adjusting bolt to get proper belt tension, then retighten the lower mounting nut and the upper mounting bolt.
4. Recheck the tension of the A/C compressor belt.