Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 1997 >> CL V6-3.0L SOHC (VTEC) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Service and Repair




SRS components are located in this area. Review the SRS component locations, precautions, and procedures under Air Bags before performing repairs or service.

1. Remove the front console.
2. Disconnect the A/T gear position switch connector (12P) and the neutral switch connector (2P).
3. Remove the A/T gear position switch from the shift lever mounting bracket.
4. Position the switch slider of the new A/T gear position switch to [N] position.
5. Move the shift lever to [N] position, then install the A/T gear position switch while aligning the switch slider with the switch slider guide pin.
6. Test the A/T gear position switch.
7. Connect the connectors.



pro multis · About Operation CHARM