Front

Front Wheel Speed Sensor:

REMOVAL

1. Speed sensor connector
2. Sensor cable fixing bolt (Upper side)
3. Sensor cable fixing bolt (Lower side)
4. Sensor fixing bolt

Removing Speed Sensor Cable From Bracket:

- Remove the speed sensor cable from bracket.

5. Speed sensor

INSPECTION AND REPAIR
- Check the speed sensor pole piece for presence of foreign materials. Remove any dirt, etc.
- Check the pole piece for damage; replace speed sensor if necessary.
- Check the speed sensor cable for short or open circuit, and replace with a new one if necessary. To check for cable short or open, bend or stretch the cable while checking for continuity.
- Check the sensor ring for damage including tooth chipping, and if damaged, replace the sensor ring assembly. Refer to removal of the sensor ring in "Transmission and Drivetrain - Wheel Hub".

INSTALLATION
1. Speed sensor (5).
- Take care not to hit the speed sensor pole piece during installation.
2. Speed sensor fixing bolt (4).
- Tighten the fixing bolt to the specified torque.

Specs:
Speed sensor fixing bolt 8 Nm (69 lb. in.)

- Install the speed sensor cable to bracket.

3. Speed sensor cable fixing bolt (Lower side) (3).
- Tighten the fixing bolt to the specified torque.

Specs:
Speed sensor cable fixing bolt 24 Nm (18 lb. ft.)

4. Speed sensor cable fixing bolt (Upper side) (2).
- Tighten the fixing bolt to the specified torque.

Specs:
Speed sensor cable fixing bolt 6 Nm (52 lb. in.)

- Confirm that a white line marked on the cable is not twisted when connecting the speed sensor cable.

5. Speed sensor connector (1).