Power Steering Line/Hose: Service and Repair

REPLACEMENT

NOTE:
- Connect each hose to the corresponding line securely until it contacts the stop on the line. Install the clamp or adjustable clamp at the specified distance from the hose end.
- Add the recommended power steering fluid to the specified level on the reservoir and check for leaks.





Adjustable Hose Clamp: (a)
- Position the adjustable hose clamps at the points indicated by (a) in the drawing above.
- Slide the hose over the line until it contacts the stop.

CAUTION: Check all clamps for deterioration or deformation; replace with the clamps new ones if necessary.





Hose Clamp: (b)
- Position the hose clamps at the points indicated by (b) in the drawing above.
- Slide the hose over the line until it contacts the stop.