Ignition Switch: Service and Repair

SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the Supplemental Restraint System before performing repairs or service.

1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
2. Disconnect the battery negative cable.
3. Remove the dashboard lower cover and knee bolster.
4. Remove the steering column covers.




5. Disconnect the connectors from the switch.
6. Remove the column holder mounting bolts and nuts.
7. Lower the steering column assembly.
8. Remove the shear bolts from the switch body, then remove the switch assembly.




9. Remove the three screws, and replace the electrical switch.
10. After reconnecting the battery, enter the anti-theft code for the radio, then enter the customer's radio station presets.