Cylinder Head Assembly

Upper Engine:

CAUTION: To avoid damage, wait until the engine coolant temperature drops below 100°F (38°C) before removing the cylinder head.

NOTE:
- Use new O-rings and gaskets when reassembling.
- Use liquid gasket, Part No. 08718-0001 or 08718-0003.
- Replace the rubber seals if there is oil leakage between the cylinder head and cover.
Prior to reassembling, clean all the parts in solvent, dry them, and apply lubricant to any contact parts.

B18C1 Engine:

B18C1 ENGINE

B18C5 Engine:

B18C5 ENGINE

NOTE: Clean the head oil control orifice and the rocker shaft orifices when installing.