Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2001 >> CL V6-3.2L SOHC >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> On-Vehicle Inspection and Testing >> Stall Speed Test
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Stall Speed Test

Test





1. Engage the parking brake, and block the front wheels.
2. Connect a tachometer to the engine, and start the engine.
3. Make sure the A/C switch is OFF.
4. After the engine has warmed up to normal operating temperature (the radiator fan comes on), shift to the 2 position.
5. Fully press the brake pedal and accelerator pedal for 6 to 8 seconds, and note the engine speed. Do not move the shift lever while raising engine speed.
6. Allow two minutes for cooling, then repeat the test in the D5, 1 and R positions.

NOTE:
- Do not test stall speed for more than 10 seconds at a time.
- Stall speed tests should be used for diagnostic purposes only.
- Stall speed should be the same in the D5, 2, 1 and R positions.
- Do not test stall speed with the A/T pressure gauges installed.

Stall Speed rpm:
Specification: 2,200 rpm
Service Limit: 2,050 - 2,350 rpm

pro multis · About Operation CHARM