Front Fender Fairing

Front Fender Fairing Replacement

1. Remove the front inner fender as necessary.




2. Open the front door. From inside the door, remove the upper and lower clips (A) securing the front fender fairing (B) to the front fender (C).




3. From the wheel arch, remove the clip (A), and release the clip (B), then remove the front fender fairing (C).










4. Install the fender fairing in the reverse order of removal, and note these items:
- Replace any damaged or stress-whitened clips.
- On the left side of the vehicle, route the rear window washer tube (A) through the slit (B) in the front fender fairing (C).
- Before installing the clips in the doorjamb area, install the front fender fairing (C) on the front fender (D) properly as shown.
- Push the clips into place securely.