Trunk / Liftgate Lock: Service and Repair

Trunk Pass-through Lid Lock Cylinder Replacement

NOTE: Take care not to tear the seams or damage the seat covers.

1. Remove the rear seat-back.




2. Remove the screws, and detach the hooks (A), then remove the upper cover (B).




3. Remove the screws, and detach the hook (A), then remove the lock cover (B), and release the hook (C).




4. Remove the retainer clip (A), then remove the trunk pass-through lid lock cylinder(B) from the lid (C).

NOTE: Wear eye protection when doing this step.

5. Install the lock cylinder in the reverse order of removal, and make sure the trunk pass-through lid opens properly and locks securely.