2nd Clutch Transmission Fluid Pressure Switch Replacement
2nd Clutch Transmission Fluid Pressure Switch Replacement1. Make sure you have the anti-theft codes for the audio system and the navigation system (if equipped), and write down the audio presets.
2. Remove the battery trim and left upper fender cover.
3. Disconnect the negative terminal from the battery, then disconnect the positive terminal.
4. Remove the battery hold-down bracket, and remove the battery and battery tray.
5. Remove the intake air duct and air cleaner assembly.
6. Remove the bolts securing the under-hood fuse/relay box, and move the fuse/relay box.
7. Disconnect the 2nd clutch transmission fluid pressure switch connector, and remove the 2nd clutch transmission fluid pressure switch (A).
8. Make sure there is no water, oil, dust, or foreign particles inside the connector.
9. Install the new 2nd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch.
10. Connect the connector securely.
11. Install the intake air duct and air cleaner assembly.
12. Install the battery tray, battery, and battery hold down bracket, then connect the battery terminals.
13. Install the left upper fender cover and battery trim.
14. Enter the anti-theft codes for the audio system and the navigation system (if equipped), then enter the audio presets.